LIQUID OXYGEN PUMP
The liquid Oxygen pump is a single acting piston pump is a single acting piston pump. It is used for filling Oxygen into cylinders up to a pressure of 165kgs/cm2. The pumps is designed for assembly in air separation unit that works by pumping liquid oxygen and gasifying the same in heat exchangers for final filling as gas in cylinder.The pump is designed for assembly in air separation unit that works by pumping liquid Oxygen and gasifying that works by pumping liquid Oxygen and gasifying the same in Heat Exchangers for final filling as gas in Cylinders. Control of liquid feed is not necessary. Because the pump is designed in accordance with the plant size and the liquid produced is constantly pumped off.

 The liquid oxygen pump consists of a stainless steel inside liner with liquid inlet and evaporated gas outlet ports. There are no valves on these ports, which are closed by the piston itself on the pressure stroke. The third outlet is the main discharge outlet with the two non-return ball valves. The two ball valve remain firmly closed. During suction stroke, due to high pressure in partly filled cylinders. To ensure that these valves are fully closed, a positive pressure of about 60kg/cm2 must be maintained on it. When a fresh batch of cylinders is taken for filling, open the manifold valve slowly or use spare batch of cylinders to ensure positive pressure on these valves.